/ Creating a Disc Jacket

Creating a Disc Jacket

You can create disc jackets for CDs, DVDs, and so on.

This section explains how to create the following jacket as an example.

  1. 1Select the folder where you saved the photos.

  2. 2Select the photo.

  3. 3Check the selected photo, and then click Select Frame.

  4. 4Click Jewel Case.

  5. 5Select the frame.

  6. 6Click Edit and Print.

  7. 7Click the photo that is automatically placed in the frame.

  8. 8Select photos from the photo list on the left, and then replace the photos in the frame.

    Note:

    If you click Add Photos, you can replace photos in the frame with photos that are not in the list without returning to the home screen.

  9. 9Click the photo in the frame, and then drag to adjust the position.

    You can also use the buttons at the top of the screen to enlarge, reduce, and rotate photos.

  10. 10Click the photo in the frame, and then click Color Adjust.

  11. 11Adjust the amount of correction and brightness, and so on, and then click OK.

  12. 12Click the gray area outside the frame to deselect the photo.

  13. 13Click .

  14. 14Select the image you want to add, and then click Open.

  15. 15Select Crop pattern, and then click OK.

    Note:

    You can adjust the cropping range by dragging the (handles) at the four corners of the photo.

  16. 16Click the image you added to adjust the position and size.

    Follow the same steps to add other images.

    Note:

    • Double-click the item you added to return to the Crop screen, and then change the cropping pattern.

    • You can adjust the size by dragging the (handles) at the four corners of the photo.

    • You can also rotate items by dragging the (handle) at the top of the item.

  17. 17Click .

  18. 18Select the stamp you want to add, and then click Open.

  19. 19Click the stamp you added to adjust the position and size.

    Note:

    • You can adjust the size by dragging the (handles) at the four corners of the photo.

    • You can also rotate items by dragging the (handle) at the top of the item.

  20. 20Click .

  21. 21Enter the text you want to add in Enter Text.

  22. 22Edit the font, size, color, and so on at the top of the screen, and then click OK.

  23. 23Adjust the position and size of the text you added.

    Follow the same steps to add other text.

    Note:

    • Double-click the text you added to return to the Enter Text screen, and then edit the text.

    • You can adjust the size by dragging the (handles) at the four corners of the item.

    • You can also rotate items by dragging the (handle) at the top of the item.

  24. 24Make print settings.

    Select whether or not to add a dotted cutoff line in Layout.

  25. 25Check the number of copies, and then click Start Printing.

    Note:

    See the User's Guide supplied with the printer for details on loading paper into the printer.

  26. 26Cut the printed paper along the dotted line.