Connect the smart device and the printer directly using Wi-Fi Direct.



1  While holding down the [Wi-Fi] button, press the [Network Status] button until the light and the light flash alternately.

2  Wait until the process ends.

When a connection is established, the light turns on.

3  Load papers.

4  Hold down the [Network Status] button on the printer’s control panel for at least 7 seconds.

The network status sheet is printed.
Note:
If you release the button within 7 seconds, a network connection report is printed. Note that the SSID and Password for Wi-Fi Direct (Simple AP) are not printed on this report.

5  Check the SSID and password printed on the network status sheet. Display the Wi-Fi settings screen for the smart device, and then select the SSID shown on the network status sheet to connect.

6  Enter the password printed on the network status sheet.

Next »

When you do not know how to make Wi-Fi settings for the smart device

Display the Wi-Fi settings screen for the smart device, select the network that you want to connect to, and then enter the password.

  • When you are using iPhone or iPad (iOS device)

Select [Settings] - [Wi-Fi] to display the Wi-Fi screen.
Turn on Wi-Fi, and then tap the network that you want to connect to from the network list. Enter the password for the network, and then tap [Connect].

  • When you are using an Android device

Select [Settings] - [Wi-Fi] to display the Wi-Fi screen.
Turn on Wi-Fi, and then tap the network that you want to connect to from the network list. Enter the password for the network, and then tap [Connect].